Airbox intake tube

[BRMark]

Where the intake tube goes to the airbox - at the elbow mine seems to be apart - there's a 5mm gap at the connection between the elbow and the plastic intake piece behind the headlight, I'm guessing this should be connected but it seems to be missing the right bits to fix the two ends together - would someone kindly take a photo of the standard set up so I can see what I need to get from scrappy? It bothers me that it's sucking hot engine bay air =[

[welshone]

I'll take a snap tomorrow for you.

[Catterall1]

Where the intake tube goes to the airbox - at the elbow mine seems to be apart - there's a 5mm gap at the connection between the elbow and the plastic intake piece behind the headlight, I'm guessing this should be connected but it seems to be missing the right bits to fix the two ends together - would someone kindly take a photo of the standard set up so I can see what I need to get from scrappy? It bothers me that it's sucking hot engine bay air =[

I have the full standard air-feed if that is what you are after?

I put it up for sale a while ago, but there was no interest.
Let me know is this is anything like.
http://forums.mg-rover.org/showthread.php?t=291300

[BRMark]

Thanks the pics on your thread are a big help, seems that the end of the elbow has been cut so it no longer slides over the caf pipe, looks like i need to replace the elbow